Skip to content
Linear Firestop
Data Sheet

Description

Concept Linear Firestops & Trapezoidal Fireblock consist of rigid slabs of non-combustible mineral wool cut into strips and trapezoidal profiles.

Purpose

Concept Linear Firestops are designed to prevent the passage of fire at the point where walls meet concrete soffits and profiled metal decking. The Linear Firestop strip can also be used as an expansion joint in masonry walls.

LINEAR FIRESTOP BETWEEN MASONRY WALL AND CONCRETE SOFFIT

Dimensions

Concept Linear Firestop Strips are supplied 1200mm long and factory cut to suit the aperture to be filled. Concept Firestop Blocks are supplied to suit the trapezoidal profile of the metal decking specification.

Fixing

Concept Linear Firestop Strips are push fitted into place. The insulation must be compressed by approximately 5% and must fit tightly and completely. All joints must be tightly butted. If the gap to be filled is between two building elements which may separate during a fire, the two components must be connected with steel brackets to ensure no separation occurs.

Trapezoidal Firestop Blocks are friction fitted into place. If the block overhangs the masonry wall by more than 50% of its size, it should be fitted to the deck with steel fixings at a max of 400mm centres. Where necessary, small gaps and un-even surfaces can be filled using Concept Intumescent Mastic

Standards and Performance

The mineral wool used in the production of Concept Linear Firestop strips and blocks achieves a fire classification of Euroclass A1 as defined in BS EN 13501-1.

The product range has been independently tested adopting procedures and criteria from BS476 : part 20 : (1987) Concept Linear Firestop strips and blocks comply with the provisions of Approved Document B3 Volumes 1 and 2 of The 2000 Building Regulations (2006 edition).

PROFILED STRUCTURAL DECKS USED TO CREATE INTERMEDIATE FLOORS

LINEAR FIRESTOP & FIRESTOP BLOCK
FILLING THE VOID UNDER A PROFILED METAL DECK

Gaps up to 75mm

Gaps up to 100mm

Width of Firestop

Fire Resistance

75mm

75mm

75mm

100mm

60 minutes

120 minutes

Accessories

We offer Concept Intumescent & Acoustic Mastic to use in conjunction with our range of fire rated strips and blocks. As well as fire rated profile fillers we also offer a range of foam fillers supplied to suit any profile and all applications.

Please contact our sales department for further information.

Back To Top